About gmagillsiemens

gmagillsiemens · 01-23-2008

Can anyone refer me to Cisco specs on dimensioning of the 2800 and 3800 routers? I need to know what throughput they can handle, number of simultaneous NATs, number of firewall rules, etc.I have looked at the specs on the Cisco webpage but nothing ha...

gmagillsiemens · 02-27-2008

cant you trigger off of the following traps if you use an IPSEC GRE tunnel?snmp-server enable traps isakmp tunnel start snmp-server enable traps isakmp tunnel stop

gmagillsiemens · 02-27-2008

I think this trap only goes up once the tunnel is configured, but never goes down again until the tunnel is deleted. Can you confirm this?

gmagillsiemens · 02-27-2008

As far as I know, there is no trap to monitor this. Either the tunnel is administratively up, i.e. configured or it is deleted.The only method I have found to do this is to use Nagios to poll the tunnel status at regular intervals using the MIB.Does ...

gmagillsiemens · 02-19-2008

Thanks for the response. My router will be required to do a lot of dynamic NATs (for around 1,400 ports) and it will be my firewall so it is likely to have 4-5 ACLs. It also must do traffic shaping for the six different types of data classes that wil...

Member Since	‎01-23-2008 01:18 PM
Date Last Visited	‎08-18-2017 03:53 AM
Posts	5

User Statistics

User Activity

Dimensioning - do I need a C2800 or a C3800?

Re: VPN tunnel monitoring

Re: Monitoring Site-to-Site VPNs Status

Re: Monitoring Site-to-Site VPNs Status

Re: Dimensioning - do I need a C2800 or a C3800?