About rscaldeira

rscaldeira · 10-06-2011

Hi all,I have two Cisco 2960 connected each other, and two hosts ESXi 4.1 with one uplink to each switch.With the Vmware Standard vSwitch all VMs work properly, but with nexus 1000v only the VMs that were pinned to first uplink work have access to m...

rscaldeira · 10-19-2011

Robert,I attached the output of the command "vem-support all". There are two files: one of the host Kursk that have a problem, and other of the host Kharkov that is working properly.When the custumer send the output of "show tech-support svs" , I'll ...

rscaldeira · 10-18-2011

Robert,The problem came back, my customer told me that the same symptoms are happen.I asked him to send the output that you wanted before (vem-support all and show tech-support svs). When I get this outputs I'll attach it for you, ok? Tks, Rodrigo

rscaldeira · 10-09-2011

Robert,After I updated and rebooted all vmware hosts and apply your recommendations, at this moment the uplinks are working well.I don't know why this occur.I'll be monitoring and executing some tests to ensure that is ok. Thank you for your attent...

rscaldeira · 10-07-2011

The problem is on the port-profiles below:dmz-int-updmz-emp-updmz-spb-uphom-upThe output of the commands are attached.Thank you for help me.

rscaldeira · 10-06-2011

Hi Robert,Thank you to reply.You are correct, the diagram only show my DMZ connections. The system-uplink, core-up and hom-up are connected to Cisco 6513, this connections are working properly. We never have problem with this connections, only with ...

Member Since	‎06-05-2009 04:58 AM
Date Last Visited	‎07-19-2018 04:25 AM
Posts	6

User Statistics

User Activity

Port Channel host mode issue

Re: Port Channel host mode issue

Port Channel host mode issue

Port Channel host mode issue

Re: Port Channel host mode issue

Re: Port Channel host mode issue