About gurinderjit.sindhar1

gurinderjit.sindhar1 · 09-10-2015

Hi, I have run some tests on our outdoor mesh network. I got acceptable SNR (25-35) but packet error rate was kinda high(10%-35%). I found one 802.11FH interferers. Is this single interferer causing problems ? or there could be any other issue?? Than...

gurinderjit.sindhar1 · 08-27-2015

Hi,I'm kinda new to mesh network and WLC. Can anybody explain to me how does vlan work in mesh network?. I have 5508 WLC and 1552 APs. 6 vlans on controller. management interface in untagged. On the switch, the port connected to AP should be in trunk...

gurinderjit.sindhar1 · 09-15-2015

Thank you. I have a electrical junction box right behind the one of the MAPs antennas . Do you think it can make an affect on PER?

gurinderjit.sindhar1 · 09-14-2015

Hi Istvan, I have 5 RAPs and 6 MAPs, Each MAP is directly connected to RAP. So there is no more than 1 hop.

gurinderjit.sindhar1 · 08-28-2015

I forgot to ask one more thing. I want voice over mesh network. I know cisco does not support voice over mesh but I have to take a chance. What kind of configuration on switch,AP and WLC is required to do that? Thanks

gurinderjit.sindhar1 · 08-28-2015

I figured it out. Everything is working now. Thank you Scott and Josh. Now I still need to figure out coverage area issues, mentioned in other post.

gurinderjit.sindhar1 · 08-28-2015

Thank you Josh for your valuable advise. I'm gonna try that in a little bit.

Member Since	‎08-12-2015 01:24 PM
Date Last Visited	‎08-18-2017 03:53 AM
Posts	8

User Statistics

User Activity

Good SNR but high packet error rate

Vlans on WLC, Outdoor APs 1552 and mesh network

Thank you. I have a

Hi Istvan, I have 5 RAPs and

I forgot to ask one more

I figured it out. Everything

Thank you Josh for your