Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I'm having problems getting the Radius server to assign VLAN for clients while at the same time doing iPSK. iPSK works but the AP seems to ignore the VLAN assignment. Hardware is C9120AXI-E using version 17.6.1.0.250 (controller) and 17.6.1.13 (AP). ...
I've desperately tried understanding the licensing of the AP in the 9100 series without success. I need a new AP for use in a home office. Nothing special but it needs to support Wifi 6 with AX and WPA3. I also need support for at least 9 SSIDs with ...
How are you supposed to set the clock on the AIP-SSC-5 module?There doesn't seem to be any way to set the clock manually, you have to use NTP. The problem is that the module refuses to set the clock if the time it gets through NTP is more than 1000 s...
Great that you managed to get it working!I still have problems. I've updated to the latest software but my access point still won't assign a proper VLAN.The "+=" syntax in the configuration file is correct, it's used by FreeRADIUS to add another copy...
I've checked the release notes and guides. But I haven't tried using only VLAN assignment, I've implemented iPSK first and then tried adding VLAN assignment, maybe I should try it the other way around.I've checked this article (Configure Catalyst 980...
Now we've managed to solve it. This is what we had to do:1. Enable NTP sync on the AIP.2. Login to the unix shell using a service account.3. Stop the NTP server in unix.4. Set the clock manually using the date command in unix.5. Start the NTP server ...
Unfortunately none of the documented methods seem to work.Rebooting the ASA doesn't update the clock on the AIP.Rebooting the AIP doesn't update the clock on the AIP.Manually setting the clock on the ASA doesn't update the clock on the AIP.Synching t...
