Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I was involved with a network migration that made me look at using the power of EEM, below is a solution for anyone who may find themselves in a similar situation.
The Challange
I was tasked to upgrade a legacy access layer of a network which wa...
I've looked around on the Cisco support forums for EEM scripts that can help me automatically configure switch ports for Cisco Access Points by utilizing CDP neighbours and found various forums where this is discussed however I didn't see a complete ...
I'm trying to install a wildcard SSL on a Cisco Prime Infrastrucure 1.4.I've manage to install this certificate on the Cisco 5508 WLC, however not so much success with the Cisco Prime.There are alot of documentation regarding the installtion of CSR c...
Having a problem installing the ncs_patch-1.1.1.24-upgrade-pi_1.2.tar.gz patch file on a virtual NCS before upgrading it to Cisco Prime Infrastructure 1.2.I've followed the Cisco Prime Infrastructure 1.2 Quick Start Guide and did not had the same suc...
Hi,I've searched around to see if someone else has experienced the same issue regarding HREAP AP's losing their VLAN mappings; however I could not find any related topics.ScenarioI've got a 5508 WLC running ver 7.0 with local VLANs assigned as follow...
If you have branches using the same ip subnet for end devices in remote branches, there is a limitation on 16.x. I've had a situation a year back where a client had a setup like this on AireOS WLC'S with no issues and when they were migrated to IOS-X...
Do your sites by any chance have overlapping IP subnets with each other? In other words, you have remote sites with local internet breakout and they all use a static subnet since they don't get routed over your WAN.
As Leo mentioned the best way to do this is assigning the WLC's and their IP's under the high availability options of the AP. The reason for is due to the election process the AP uses to discover WLC's where the static configuration will override DNS...
You will find that the channels will change more frequently in the 2.4GHz band compare to the 5GHz due to the limited amount of channels available in 2.4GHz vs 5GHz.As Rashika mentioned adjusting your DCA would be a good idea, I would also advise mak...
