Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,We have a pair of C220 M3 servers that we have connected to a pair of fabrics (6248) for single-wire management through the VIC 1225. We'd like to also leverage the two on-board 1Gb NICs, however it is a bare metal Windows 2012 server and does...
Hello,Recently we’ve had a few guest VMs lose connectivity, the subsequent troubleshooting has led us to the below VMware KB article stating the resolution is fnic drivers on ESXi hosts being updated to version 1.5.0.45. Our FIs are all currently 2....
Hello - Are there any options to disable the snmp link-status trap on Veth interfaces on the 1000v? The normal "no snmp trap link-status" command is not available on a Vethernet interface, nor on the port-profile. You can do it on the physical upli...
Hello -We have a Nexus 7010 and we are testing out using the fabric extenders for a need. We have a demo 2224 unit and have it connected to our M132XP-12 10G blade in the 7K but the FEX won't come online. I would have figured a possible software in...
Hello - We have a Nexus 7010 and we are testing out using the fabric extenders for a need. We have a demo 2224 unit and have it connected to our M132XP-12 10G blade in the 7K but the FEX won't come online. I would have figured a possible software i...
Thanks for the response and information, Siva. To confirm I'm reading that correctly, if you're using a VIC 1225 and single-wire management through UCSM you cannot also use the onboard 1Gb NICs, correct? We'll have to trunk to an upstream Nexus and...
Thanks, Michael. I already engaged our team yesterday on it so I'll follow-up with the bug ID and ask them to look at a feature request for the other piece.Thanks for your assistance with it, much appreciated.Chad
Thanks, Michael. Related to the issue, if a request can be made this would be helpful at implementation to be able to apply it to a port-profile as well. In our case as a Service Provider we'll have hundreds/thousands of veths and can't go modify e...
Hi Michael and all - We are on version 4.2(1)SV1(4a).Below is screen capture for your question. You'll see that when trying to do 'no snmp trap link-status' for a vEth it errors for invalid command. If you do the help context you'll see that the on...
FYI - I finally got confirmation from Cisco that the 2224 isn't supported on this release even though the N2K document says it is. The 2224 support comes with the Delhi release, only the 2248 is supported right now.
