About lucy.bettison

lucy.bettison · 11-03-2022

Hi,Currently trying to configure two HP C7000 Chassis ports bundled into one EtherChannel, trunking multiple VLANs on a Cat9300When we configure the interfaces with channel-group 10 mode on, both links come up bundled into the port channel but the ho...

lucy.bettison · 11-07-2022

Don't have a switch in the HP side. They just use Shared Uplink Sets.

lucy.bettison · 11-07-2022

Channel-group listing:----------------------Group: 1----------Group: 2----------Group: 10----------Ports in the group:-------------------Port: Te1/1/7------------Port state = Up Mstr Assoc In-BndlChannel group = 10 Mode = Active Gcchange = -Port-chan...

lucy.bettison · 11-07-2022

Flags: S - Device is requesting Slow LACPDUsF - Device is requesting Fast LACPDUsA - Device is in Active mode P - Device is in Passive modeChannel group 10LACP port Admin Oper Port PortPort Flags State Priority Key Key Number StateTe1/1/7 FA bndl 327...

lucy.bettison · 11-07-2022

There is no config on the HP side. They just tag VLANs.interface TenGigabitEthernet1/1/7description to HP c7000 Hostswitchport trunk native vlan 1000switchport trunk allowed vlan 1300,1301,1305,1308,2300,2301,2305,2308switchport mode trunkchannel-gro...

lucy.bettison · 11-07-2022

That put both ports into suspended. They don't inherit all the settings.And having LACP rate fast on both interfaces still causes one to go suspended.

Member Since	‎10-13-2016 08:05 AM
Date Last Visited	‎11-09-2022 02:51 AM
Posts	8
Total Helpful Votes Received	10

User Statistics

User Activity

C9300 - Trunked EtherChannel issues

Re: C9300 - Trunked EtherChannel issues

Re: C9300 - Trunked EtherChannel issues

Re: C9300 - Trunked EtherChannel issues

Re: C9300 - Trunked EtherChannel issues

Re: C9300 - Trunked EtherChannel issues