Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi All,I have network with 4 asr1004 routers and two sites.The main traffic in our network is multicast.I have designed the network with OSPF on all the links and Anycast RP redundancy.everything is working well except one thing.When the Main RP rout...
Hi All, In the document it describes that i need to enter file with .pkg but in the waas sre zip there is no pkg file.What file do i need to enter in the ftp path ? Thanks,
Hi,The problem eventually was very simple.After i have made debug every aspect of multicast and msdp protocols i did not find anything wrong.The solution was to change the carrier delay on the interface.In my original configuration the carrir delay w...
Hi,Here the RP configuration on both RP routers:RTR1:interface loopback 0 ip address 1.1.1.1 255.255.255.255interface loopback 1 ip address 10.1.1.1 255.255.255.255ip msdp peer 10.1.1.2 connect-source loopback 1ip msdp originator-id loopback 1ip pim ...
Hi,Thanks for the detailed explanation.I didn't found/understand couple thing.When i am signing the CUCM with external CA (MS CA) which template do i need to use ?And if all the certificates are the same type ? for example i need to sign the ipsec...
