Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Sometimes some XP clients on VLAN1 cannot ping clients on VLAN2 and vice versa. When it occurs it can last up to about 10 minutes before it rectifies itself. VLAN's can ping all the clients in their own VLAN at that time also, but not the other VLAN....
I just want to know what can be the Issues with running OSPF in a Network.If anybody has faced any issues in a Network due to OSPF please share ur experiences regarding OSPF Issues.
why do we have to use a Link-State Routing Protocol only like OSPF or ISIS for running MPLS in a service Provider Network.Why don't we use RIP-V2 or IGRP or EIGRP .are there any particular reasons for which we have to use Link-State Routing Protocols...
Which service is better MPLS or Frame-Relay.Like if i have a customer having a HO and multiple sites i should provide him services on MPLS or Frame-Relay.What r the important differences between MPLS and a Frame-Relay service not configuration wise b...
Please see the details attached.I have not made call to any isdn number or am not receiving call from any number but still when i check with sh isdn act or sh isdn his i see an outgoing call from my PRI.When i check with sh isdn status i can't see an...
now working.actuall that vlan 35 was not showing in Switch-1 when i checked it with sh vlan command.i then created vlan 35 in witch-1 by issuing command vlan 35 in global config mode.it means when ever i have to assign a port to a new vlan in Switch-...
no i don't have any other config.i would like to mention one thing here that i have already one vlan working on this switch and it is working absolutely fine without any issues.All the related ports are up.
yes i am sure and have confirmed from telco that it is a 256 k link only.one more thing from which i could confirm its capacity is that this link is getting terminated on a E1 link at one end where only 4 timeslots of 64 kbps each have been provided.
Even if i put a normal ping with a repeat count of 1000 without increasing byte size , still i see a lot of packet drops.load on the link that time is hardly 20 kbps whereas i have restricted it to 128 kbps, so it should not show any packet drops.see...
