Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello team,I have a problem with the Cisco guides and releases for hte upgrade procedure (ISSU) for 9500 from 16.9.3 to 16.9.6. It is a stackwise virtual cluster and I see following info: In this guide :https://www.cisco.com/c/en/us/support/docs/swit...
Hello,I have a question which couldn't find in Cisco's guides or maybe is a miss of my knowledge. We have a ASA firewall with few site2site IPSEC tunnels that are configured on it. Currently only one tunnel is up - maybe the rest are not in use - no...
Hello, I am struggling to find out the number of total users that can use anyconnect VPN. Below is partial show version plus the group-policy. So we have 2500 users that are the max number, but if I have 3 simultaneous logins per user Does it mean i...
Hi guys, Could someone please explain dhcp proxy mode "GLOBAL". I find the official guide of dhcp setup for wlcs not very detailed. Is it true that we should specify interface which should be used only when Global is set. If yes, what happens when yo...
Hi guys, I am planning upgrade of a pair of wlcs in HA. 5508. Currently 8.2.166.0 version and upgrade to be to 8.3.150.0 (which is MD one recommended by Cisco). I found a link in the community > https://community.cisco.com/t5/other-wireless-mobility...
The ISSU upgrade failed. It installed on standby succesfully, after booting and completing the SSO, the Active didn't proceed with the install... I involved TAC and they used some internal commands to stop the process and then manually upgrade the Ac...
Hi Mark,
Thanks for the links, but in the two files the supported models for each release are:
9500-24Q (40G platform)
C9500-12Q (40G platform)
C9500-40X (TenG platform)
C9500-16X (TenG platform)
but I do not see C9500-24Y4C - which is the 25...
Hi @chatataridge ,
Do you have any news on which IOS will support stackwise.
If someone else has the answer, I would appreciate if you share it.
Thanks
I had the same issue. ... Just no comment on the buggy ios-es. Fuji 16.9.1 is mine.
I enabled ip routing. all is up - svi is up, interface is up. network of svi 127 is 10.127.1.0/24
interface Vlan127 ip address 10.127.1.9 255.255.255.0
#
initially th...