Here is a resource for using voice translation rules:http://www.cisco.com/en/US/partner/tech/tk652/tk90/technologies_configuration_example09186a00803f818a.shtml
Please use DSP calculator to determine if DSP resources are sufficient and to obtain template for configuration:http://www.cisco.com/web/applicat/dsprecal/index.html
Run following debugs:debug ccisp messagesdebug voip ccapi inoutThis will provide the SIP message details and verify your dial-peer matching for inbound and outbound.I will assume the Call-ID for the partial messages are the same, thus suggesting the ...
Typically, 47 cause code is due to a media resource that is a transcoder, MTP, etc... not being available. You should start by looking at CUCM traces for media resource allocation errors and verify that your codecs and regions settings are all correc...
Here is a few links to help you understand and troubleshoot or at least FXO disconnect issue:Understanding FXO Disconnect Problemhttp://www.cisco.com/en/US/tech/tk652/tk653/technologies_tech_note09186a00800ae2d1.shtmlAlso, there is an excellent troub...
