I am marking traffic with DSCP 46 on ingress (Fa3/33) and I need to rate limit all traffic to 20Mb/s on egress (Fa3/34) not dropping the packets marked DSCP 46. Is there a good way to do this?Many Thanks!

Currently E&M h323 gateway sending calls to h323 gateway connected to PSTN. Need to send E&M calls to DT24+ connected to PSTN. Do I point E&M Gateway to Callmanager? Do I need to make E&M h323 gateway MGCP?Thanks Much!

When g729r8 is configured on the voip dial peer that points to gateway that will terminate call on to PRI, the call fails. When codec is set to g711ulaw, the call completes.Am I missing a command that would offer g729r8 as a possible codec on the gat...

Is there functionally anything that would keep a VIC-2FXO-EU from working in the US?

Would the COR be an option to force a 7960's prime line to access a specific dial peer on a 2611? The application is replacing a decrepit PBX that serves 8 users with IP Keyswitch. The current lines are OPX which will be replaced with VoIP. We want t...