You'll want to use policy routing where you match a source/destination with an extended access-list and then set the next hop address.

I am not certain of you require the three subnets to be on the same broadcast domain (VLAN and MSFC VLAN Interface) or if they can be separate VLANs.If you need them to be on the same physical network, VLAN, or broadcast domain, configure secondary I...

I'd steer clear of the 5000 series. Alternatively, I would recommend a Catalyst 4006 bundle and a 4232-L3 module (IP and IPX Routing, 2 Gigabit router interfaces, 2 Gigabit trunk to backplane, and 32 10/100 ports). Plus the switch fabric is 24Gbps c...

If from global configuration you type "ipx routing " and you get that message, upgrade your IOS to IP/IPX, Desktop, or Enterprise feature set. The IP only feature set is usually what ships with routers.

One or two routers? Interface tracking commands with HSRP will work for failing over to a backup router if an interface or subinterface goes down or down/down. Backup interface commands on one router will bring up a directly connected backup link (...