I have a problem with the policy based routing (PBR) functionality on the ASR920 router. I'm starting to think the router has a problem because apparently I have the settings OK and also de TSHOOT is OK. To start I have the license OK and the SDM TEM...
Hi guys,Thanks for the answer @Ramblin Tech.As the router ASR920 makes impossible the scenario PBR+TUNNEL, i have an idea i would like to check tomorrow when i arrive at the office:@MHM Cisco World said to configure the route-map adding the word recu...
Hi guys,I tried with this @Ramblin Tech:The scenario is EDC1-EDC2-EDC3 are directly connected. EDC1-EDC2 vlan95 (tagged). EDC1-EDC3 vlan93 (tagged) (sorry for the picture looks like a baby working on it)So, i did this:1. Configure on EDC2 interface l...
Hi,Could be. Is one of possible causes i thought. But i can't change the interface. Must be int tunnel because is where the traffic comes (input) and frome this interface i have to apply PBR.Sorry i did not understand this:If you have the time, you m...
Hi,Yes that's how it is. The scenario is:ALL the traffic that comes from the tunnel interface (in EDC origin I also have PBR) has to be sent to the next hop by the FW. The PBR of this headquarters, headquarters "is easier" since it is simply EVERYTHI...
