i,
Current setup is ASA 5520 and we have remote clients using Any Connect.
We have local address pools set up on the tunnel group and all is working fine.
We want to test using an external windows DHCP server for IP assignment so we have set up a...
Our current setup has an ASA 5520 9.1 (7) 13
We use AnyConnect for our remote VPN clients. (Clients have the Any connect client pre –installed on their laptops.)
It uses IPsec v2 and an internal address pool for IP assignment.
We have the need ...
Hi,
I need to keep the original client profile as it is currently being used.
I created a new profile which was identical except for the hostname.
Which part of the client profile is the bit that references the new tunnel group?
I can't see anythin...
Appreciate your reply,
I had set up the new tunnel group which referenced the DHCP servers (although I did this via ASDM...Does this matter?)
I created a new AnyConnect client profile via the ASDM and exported this to my test laptop.
I removed ...
we have one connection profile set up using an internal address pool x.x.99.0
Can we have another connection profile on the ASA that uses our internal DHCP server x.x.77.0
at the same time?