Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
i need to provide remote access to external users over VPN connection. i have an server 2008 with 1 NIC (10.20.1.220) and condifured VPN on RRAS, i enabled GRE and 1723 port on my Cisco firewall as well (10.2.1.220).I can VPN to RRAS internally fine ...
Hi,I configure VPDN on cisco router fine, i can dila vpn from windows vpn client externally fine. but o cannot access any servers behind my router. i can ping router internal IP address (10.2.1.1) only.i have two subnet 10.1.1.0 and 10.2.1.0 which i ...
i need to provide remote access ro external users over VPN connection. i have an SBS server 2008 with 1 NIC (10.1.1.1) and enabled VPN via " Configure Virtual Private Network" option on SBS console, i enabled GRE and 1723 port on my Cisco firewall as...
I do have two internet connection on my Cisco ASA, int eth 0/0 and int eth 0/3.the IP on int eth 0/0 139.130.1.206 is pingable and this IP is natted to our server 192.168.80.7 we can RDP to this server from internet.we need to terminate RDP/NAT acces...
Hi Dear,I do have router in perth that is connecting to headoffice (sydney) through IPSec VPN.we cannot do anything exepr RDP and browse fileshare on sydney servers from perth.i need to have ftp access to an specific address (203.107.5.4) which is lo...
Hi Jennifer,The router not accept "ip nat inside source static tcp 10.2.1.220 1723 interface Dialer0 1723 extendable" i have to remove "extendable" to apply it.the issue is still in place after change on NAT per your advice.i can VPN from other branc...
Hi,Thanks for your reply.I changes pool and sydLAN access list per your recommendation, now i can ping any server at 10.2.1.0 subnet but no good 10.1.1.0just let you know that 10.2.1.0 is direct network and there is ipsec tunnel between 10.2.1.0 and ...
i moved the access0list above the deny ip any any. now i can telnet to port 1723 from external. i can see that ip nat translation is working but i still canoot get through.what can be the issue and how can i do testshow ip nat translation:tcp 59.167....
