Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello All,
The CPU of a router is overloaded, due to traffic. When the bandwidth is loaded, the CPU is loaded as well.
Please see attached the input of the commands "show proc cpu history" and "show proc cpu sorted" on 1 minute intervall. It goes fro...
Hello,
I have 4 AIR-CAP1702I-E-K9 Access point which join the controller for some time (2 hours), then disassociate from the controller randomly.
Please see attached the controller configuration.
This logs keeps appearing on the AP when it is no mo...
There's indeed a complex configuration implemented on this router, and the bandwidth can achieve a total (Up/Down) of 35 Mbps.
It seems that we will need to change the platform.
Thank you
Hello Leo
The issue was resolved after changing the PoE switch configuration, and adding its mac address to the field AP injector, override checked on the WLC.
Thank you for your help on this
An other information, when the APs join again the wlc, they have the PoE status "Power injector/normal mode" before switch by itself to "PoE/Full Power".
I read the guide, and understand that besides the AP "-UX", the others can have conflicting issue regarding the regulatory domain codes.
I am checking this, trying to see if we can modify it.
However I just want to make sure you have all the informat...
