About smhussain

smhussain · 02-16-2011

I am using two sets of ACE load balancers for load balancing traffic across two firewalls (firewall load balancing).The solution works fine. I have a virtual address of 0.0.0.0 in either direction to match traffci going from the internal users to the...

smhussain · 01-13-2011

Hi,Looking for some advice on Implementing NAC across the enterprise. The environment uses laptops, desktops and thin-clients (Vmware VIEW, VDI) which connect to ESX servers where the actual machines reside (running Windows 7 and Windows XP operating...

smhussain · 12-13-2010

This question is regarding Firewall load balacing using Cisco ACE 4710 applianceIs it possible to use any other predictor method other then hash based source (or) destination based load-balancing when using FWLB?If I am using reverse-sticky groups (...

smhussain · 04-29-2010

I have a cisco 5520 firewall pair that is being used as a VPN gateway (for remote VPN users) and as Internet Edge firewall (to provide outbound internet connectivity).We are enabling NAC for remote VPN users. I will be deploying it inband with layer ...

smhussain · 08-18-2009

We have two sites that connect via MPLS. The CIR of the circuits is 3Mbps.We already have QoS configured for Voice/Video traffic which works fine. We want to restrict traffic coming from a particular applcation to 1 Mbps. I am looking at doing this u...

smhussain · 01-15-2011

Yes the thin-clients will be seen as standard devices on the network.Each Virtual Machines running on VMware ESX server (that the thin-clients will connect to) will also have unique MAC and IP address.Thanks,Syed

smhussain · 12-14-2010

Thank you for the detailed response Sachin!So just to summarize, if the environment uses FTP (or) other similar protocols that require multiple connections on different ports as part of the connection set-up process the only option for FWLB is source...

smhussain · 12-13-2010

Is it possible to use any other predictor method other then hash based source (or) destination based load-balancing?If I am using reverse-sticky groups (along with mac-sticky) then will it be possible to use least-connections or least-loaded predicto...

smhussain · 04-30-2010

This is exactly what I was looking for.Thank you for the response.Regards,Syed

smhussain · 08-18-2009

I cannot nest the policy. It gives me an error:% Error! cannot attach policy Out2MPLS under Out2MPLS.

Member Since	‎04-12-2006 10:04 AM
Date Last Visited	‎08-18-2017 03:53 AM
Posts	29

User Statistics

User Activity

Cisco ACE - Firewall load balancing

NAC Design question

Firewall Load Balancing - Question

NAC Appliance with ASA (For remote VPN users)

Traffic shaping over WAN

Re: NAC Design question

Re: Firewall Load Balancing - Question

Re: How does Firewall Load Balancing Work on the ACE module?

Re: NAC Appliance with ASA (For remote VPN users)

Re: Traffic shaping over WAN