About rgilbert111

rgilbert111 · 06-20-2016

Hello, - What are the broadcast domains in this network? - Are all Layer 2 and Layer 3 protocols supported on VLAN 111 and 112 which are the /30 SVI links connecting the L# switches to each other. - If PC1_VLAN102 sent out an ARP broadcast, would th...

rgilbert111 · 06-21-2016

Hello DA, Below is a "Show VLAN id 112" and as you can see, VLAN112 is active on Gi1/2 which is a L2 trunk between the L3 switches. The trunks alternate between Vlan 111 and Vlan 112 throughout the network. #sho vlan id 112 VLAN Name Status Ports-...

rgilbert111 · 06-21-2016

Hello DA, VLAN 111 (SVI) and VLAN112 (SVI) are point-to-point links created for each physical link between each L3 switch. This is what I am referring to as an SVI link on a L2 802.1Q trunk, which are L3 links. This why I was wondering if they pas...

rgilbert111 · 06-21-2016

Hello Stuart, Thanks for the reply. So you are saying that if a device on VLAN1 sends out an arp, the arp will only broadcast to all devices on VLAN2 throughout the network unless directed broadcast is enabled? Therefore VLAN1 sends out an arp, i...

Member Since	‎06-20-2016 11:15 AM
Date Last Visited	‎08-18-2017 03:53 AM
Posts	4

User Statistics

User Activity

Are Layer 2 broadcasts passed on by multilayer switch SVI interfaces/trunks or are they blocked?

Hello DA,

Hello DA,

Hello Stuart,