About synertecadmin

synertecadmin · 10-05-2018

Hello, We are running out of IP Addresses in our DHCP scope, so I have been tasked with sorting this out. One possible solution we are considering is to setup a second scope and use Superscoping. Our main IP range is 192.168.0.0/24 and we would lik...

synertecadmin · 10-05-2018

Thank you very much to everyone who took the time to reply and thank you for your patience as well

synertecadmin · 10-05-2018

I’ve just fixed it the l2 switch had 192.168.0.1 set as an IP Address for vlan1 as soon as I removed that IP Address then I got the correct transfer speed. I hadn’t thought to check the l2 switch but it had some old config info in it. not sure ...

synertecadmin · 10-05-2018

Hi Rick, you are absolutely correct. The transfer works just very slowly. If I connect the clients directly to the L3 switch then I get the correct transfer rate, but when connected to an L2 switch (which connects to the L3 one), then the transfer sp...

synertecadmin · 10-05-2018

An earlier post asked -> check if the L2 switch also knows about the different VLANs? What I mean by the L2 switch has no config is that I have not configured them with any of the VLANs or as per your post I have not configured them as access port...

synertecadmin · 10-05-2018

Member Since	‎10-05-2018 03:39 AM
Date Last Visited	‎12-06-2020 08:22 AM
Posts	15

User Statistics

User Activity

Slow transfer speeds over different subnets

Re: Slow transfer speeds over different subnets

Re: Slow transfer speeds over different subnets

Re: Slow transfer speeds over different subnets

Re: Slow transfer speeds over different subnets

Re: Slow transfer speeds over different subnets