Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi All,
I have below config
IPV4 Ldp session
7x50 -------------------------------------------------------- Cisco ASR 9006 ( VERSION 5.3.2)
I see with below config, Cisco ASR9K is not sending du...
Hi All,
I am trying to configure MD5 Authentication (Cisco ASR 9006 with version 5.3.2) per LDP Neighbor , seeing below error
RP/0/RSP1/CPU0:ios#config tThu Jul 21 20:40:20.476 UTCRP/0/RSP1/CPU0:ios(config)#mpls ldp neighbor 10.20.1.2:0 password e...
In Cisco ASR 9006, I had enabled Entropy Label, under mpls ldp "entropy-label" , commit goes through fine. but I don't see ASR9006 is generating ELC TLV for its own system FEC.
7x50 ------------------------ASR9006 -----------------------7x5...
I flapped the session , still I don't see Cisco Sending ELC Tlv.
XR Version 5.3.2
RP/0/RSP1/CPU0:ios#show versionSat Jun 25 16:01:45.739 UTC
Cisco IOS XR Software, Version 5.3.2[Default]Copyright (c) 2015 by Cisco Systems, Inc.
ROM: System Bootstra...
As per below doc
http://www.cisco.com/c/en/us/td/docs/routers/asr9000/software/asr9k_r4-2/mpls/command/reference/b_mpls_cr42asr9k/b_mpls_cr42asr9k_chapter_01.html#wp2525564653
it is supported in ASR9K from 5.3.2 onwards, but that seems to be not ...
