Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I am trying to setup a new WLC 9800-L-F (version 17.3) in conjunction with a 9115AP (version 8.10) but am having issues getting the AP to connect to the controller. This is the error that I am seeing on the AP when attempting to connect. [*01/29/2...
Hello! I am trying to put a FW 5506 inline (Routed Mode) between our corporate network and an ICS network controlled by a PLC. If I directly connect devices to the FW and assign their corresponding FW interface as the Default Gate Way traffic has no ...
I have a Cisco 2911 RTR Sub-InterfaceInterface 0/0.100 description "Direct Connect to AWS " encapsulation dot1Q 100 ip address X.X.254.4 255.255.255.240 Directly connected to a Cisco 3650Interface 1/0/23 description AWS Connect switchport access vla...
I have been asked to provide a report of a particular users internet usage over a certain time period. I am struggling at the finding the right combination of report parameters to provide these results. Can anyone help point me in the right direction...
While I was able to ping across both networks and bidirectional from each device the APs wouldn't join. The resolution seemingly was nothing to do with the WLC configuration. I changed my upstream switch port connecting to the service port on the WLc...
