Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Please advise on the below. I have two SSID both have different subnet, example subnet A n B How do I link 1 SSID with 1 subnet and have the AP as the dhcp server to give IP address to any devices connect to the AP
I have 3 switches, 1 set to core switches with dhcp server and all vlan, the other 2 switches are connected to this core switch via trunk and get all the vlan from the core switch, vlan as below Core SW - VLAN 11, VLAN 13, VLAN 21 and VLAN 888SW1 - ...
can advise on the belowBase on the screenshotmy 3850 EOL is on the IOS 16.3.X, not on 3.6.xE for 3850?My firmware is Cisco IOS Software [Denali], Catalyst L3 Switch Software (CAT3K_CAA-UNIVERSALK9- M), Version 16.3.5b, RELEASE SOFTWARE (fc1)
