About cbaze

cbaze · 07-03-2023

I have 2 Cisco CBS350 switches. They are connected by fiber. I am trying to setup a VLAN (20) on port 1 of each switch to isolate the 2 machines so they can only see each other. I have create VLAN 20 on each switch. I have setup each fiber port as Tr...

cbaze · 07-05-2023

OK. It is working now! Thank you for you held and patience!!

cbaze · 07-05-2023

I have it down to this!interface TenGigabitEthernet1/0/1switchport mode trunkswitchport trunk allowed vlan 1,30macro auto smartport type switch $native_vlan 1!

cbaze · 07-05-2023

Here is what is gives:IT-CBS350-24T#config tIT-CBS350-24T(config)#interface TenGigabitEthernet1/0/1IT-CBS350-24T(config-if)#no spanning-tree link-type point-to-point% Wrong number of parameters or invalid range, size or characters enteredIT-CBS350-24...

cbaze · 07-05-2023

Do you know can these be removed by port? I am not seeing that.

cbaze · 07-05-2023

Yes everything connected to VLAN1 communicates just fine. Only VLAN 30 does not work between switches.

Member Since	‎10-17-2018 05:57 AM
Date Last Visited	‎07-12-2023 12:04 AM
Posts	18

User Statistics

User Activity

Vlan Problem

Re: Vlan Problem

Re: Vlan Problem

Re: Vlan Problem

Re: Vlan Problem

Re: Vlan Problem