Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have a problem with a customer network. The solution is probably really simple, but I can't see it!The network is made out of a 3750 (Coreswitch) and multiple pairs of 2950's (Access-switches). Each 2950 has a Fiber-uplink to the Coreswitch and a ...
Thanks for the quick update! In the mean time i opened a case with TAC for a procedure / guidelines to perform the migration to higher bandwidth SVL-links. If provided and the migration succeeded, i'll try to remember to post it here!
Configuring a site to site VPN tunnel is not that hard, you can find plenty of information about this subject on the internet Some examples:http://www.routergeek.net/content/view/50/37/http://www.cisco.com/en/US/tech/tk583/tk372/technologies_configur...
I don't have personal experience with USB 3G modems on Cisco routers, but I do know that you can configure VPN L2L tunnels over 3G connections with the Cisco 880G series (800 series router with 3G module).It's possible that a 3G USB modem isn't even ...
Let's see if I understand your question correctly: You use a Cisco VPN Client to connect to a ASA5510. But you found out that you cannot open a manegement connection to the outside ór inside of the ASA when you have a VPN connection.If you have a VP...
