Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,can you give me the destination ips , i.e when i take a example 10.10.10.1/24 and 10.10.10.2/24 are the ips on your LAN that are trying to communicate to some ip for video communication and other ips in the SUBNET that the users are trying to a...
OSPF classifies different media into the following three types of networks by default:•Broadcast networks (Ethernet, Token Ring, FDDI) OSPF messages sent on broadcast networks use IP multicast addresses.•Point-to-point networks (HDLC, PPP)OSPF messag...
Hello Billy,when you no powered or not recognised means these interface are not showing when you type " sh ip int brief"i did not the Card type command on your device can you add thiscard type t1 0 0card type t1 0 2controller T1 0/0/0 framing esf fdl...
Unknown protocol drops reports the packets with unknown or un-configured protocol on a per interface basis. Therefore it can be any protocol that the router doesn’t recognize.it means if you have disbaled CDP on teh router interface and enabled on ot...
do you have any files in the slot0: , try and see if you have any files dir slot0: and give the respective file name to delete those check the part number of the card in cisco site and find out that is that supported on other SUP , if yes insert to o...
