Hi there,I'm trying to get the following running.I have 4 SubnetsVLAN 1 172.20.0.0/16 with the default GW 172.20.200.254VLAN 10 192.168.10.0/24 with the default GW 192.168.10.2VLAN 59 192.168.59.0/24 with the default GW 1...
Hi David,I cannot check it @ the moment, becaus it's an production environment. But if I remember correct - it tried pings and got something like...ping to 192.168.59.4 from 172.20.200.192172.20.200.254 (the SG300 IP) told me 192.168.59.4 Address no...
Hi David,i did this as I wrote in my first poste.I wrote----------------------------------------Then I added the needed routes to the existing Firewalls/Gateways that they know how to reach the other networks.i.e. from VLAN 59net 192.168.10.0/24 rea...
Hi David,you wrote....--------------Pretty much, it looks like you have two sets of gateways going for both networks, 253 and 254. Ideally, since you have a router that understands vlans, I would leave the sg300 in layer 2 mode and setup a trunk b...
