it came down to the APs fine-tuning.we migrated systems from aerohive to ruckus and the problem went away, our aerohives were very outdated an the new ruckus handles the client handout much more graciouslyhence eliminating the issue altogether.
if i read correctly below, if this traffic is going thru a tunnel then the ACL could be wrong and your protocol could also be wrong.if the router decapsulates the packet after it checks the ACL , then you will never gte a hit on the debug.. i suggest...
i can see that this is resolved, usually you place the root switch in the same switch that is doing the routing for that vlan (AKA where the SVI is) the root is not only a mechanism to find the closes point to the IP gateway, but also to define the p...
i have the same issue on my network, but it came down to wireless access points broadcasting the same mac on the same vlan, and the host was an apple phone,part of the issue will be with the APs broadcasting their mac address tables to the switch and...
it ended up being the speed on the other end,i had the same issue and as soon as i changed the speed to 100 and duplex auto, the interface came up with no problems!