About DrFafnir

DrFafnir · 01-10-2019

Hi,I'm a non professional user and need to configure a SG350-10 to link 2 subnets. I'm stuck with this, here's my situation, including ping results from 2 test-PC."Internal" subnet: 192.168.10.0/24VLAN 1, switch IP 192.168.10.1, ports GE1 to 8test-PC...

DrFafnir · 01-11-2019

OK, I have my solution for the DNS :1) set directly the ISP router IP as DNS in the config of static clients.2) set the ISP router IP in the DHCP server options of the switch : IP Configuration/DHCP Server/Netword Pools/Domain Name Server IP Address ...

DrFafnir · 01-11-2019

OK, I have my solution for the DNS :1) set directly the ISP router IP as DNS in the config of static clients.2) set the ISP router IP in the DHCP server options of the switch : IP Configuration/DHCP Server/Netword Pools/Domain Name Server IP Address ...

DrFafnir · 01-11-2019

Here's the config I tried (cf. printscreen). Do you see something incorrect ?

DrFafnir · 01-11-2019

Hi Seb, You were right: it was the windows firewall who blocked the pings from other subnet. Thanks a lot ! I think I have next a DNS problem. I set DNS on the switch: 1° 192.168.1.1 (ISP router) and 2°/3° the two DNS of the ISP (taken from router's ...

DrFafnir · 01-10-2019

Hi Seb,Thanks for your answer. My goal is to use the L3 switch to route between the two VLAN, and not the ISP router (over which I have very limited control and config possibilities). The gateway of test PC on VLAN2 is 192.168.1.3 (the switch VLAN2 I...

Member Since	‎01-10-2019 12:38 PM
Date Last Visited	‎01-18-2019 01:20 AM
Posts	7

User Statistics

User Activity

SG350-10 inter VLAN L3 config ?

Re: SG350-10 inter VLAN L3 config ?

Re: SG350-10 inter VLAN L3 config - and DNS setup

Re: SG350-10 inter VLAN L3 config ?

Re: SG350-10 inter VLAN L3 config ?

Re: SG350-10 inter VLAN L3 config ?