please respond any one my Cisco 4321 router has successfully power on but unable to enter in to configuration mode (mean not enter in to the modes user mode ....)just power on please give me solution whom we have a approach but it is not under in war...
hiany one can tell us how to change root port by using commands. in my organization we have two backbones one from directly connected l 3-switch gig-port another one from l 2 switch gig port but it is considering as port -port how to change root port...
Sep 5 07:52:45.087: %IPC-5-WATERMARK: 2574 messages pending in x.mt for the port Multicast Group(10900100.8F) from source seat 10900100, Some of the mumbers telling this is related to port traffic . one of the port has more&more packets generate ...
any one give answer in my client we are getting so many out discard errors from few gig ports from L-3 switch when i clear counter errors it is showing no errors up to 1 or 2 hours again it is showing so many errors but as per my client requirement w...
my switch has two backbones one from l-2 another from L-3 now as per S.T.P DATA port from l-2 Is the root port from l-3 it is showing alternate-block port . i want to change root port direction from L-2 switch port to l-3 switch port because as per...
CONFHALL01#sh spanning-treeVLAN0001Spanning tree enabled protocol ieeeRoot ID Priority 32769Address 000b.5fa7.2e00Cost 12084Port 26 (GigabitEthernet0/2)Hello Time 2 sec Max Age 20 sec Forward Delay 15 secBridge ID Priority 49153 (priority 49152 sys-i...
s.w _v.l.a.n -4- v t p _user_notification:v t p protocol user notification : version 1 device detected on g i 1/0/24 after grace period has ended s.w _v.l.a.n -4- v t p _user_notification:v t p protocol user notification : version 1 device detected...
