I need to do an RFC2544 test with software loop on the interface between RFC2544 tester and Cisco kit. Has anyone already done this test with a single test device (1 interface) if yes I'm looking for configurations for ASR9K
I can't bring up a MPLS TE tunnel with fast-reroute Node Protection, here is the error I get. *Feb 18 11:21:31.137: %MPLS_TE-5-LSP: LSP 2.2.2.2 5_192: DOWN: path error I attach the headend's config interface Tunnel5 ip unnumbered Loopback0 tunnel...
