Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have the following equipment:Cisco 871W router2x WAP 4410N APs running 2.0.3.3I currently have 1 AP connected to the router via copper. The AP to AP link is over 802.11. I have attached a diagram reflecting the current topology.The AP-to-AP link ...
I have a NAM and NAS pair that I have recently upgraded from 4.1 to 4.7 using the proper upgrade path. These devices also received new IP addressing. My issue is that when a user is routed to the NAS the redirect page seems to point to the old IP ad...
Hi John,I had better luck using the 4410N set to Wireless Client/Repeater for the AP Mode.I used the site survey and selected the SSID from the anchor router and then configured the Security settings appropriately. In my case I was using WPA since t...
