About ChrisCross

ChrisCross · 01-24-2019

Hello,I have a network where by I have been given a LAN block 66.157.179.160/252 and serial IP by my ISP. I have successfully configured one of the 550 ports with the correct serial IP addr and gave a default route to the remote serial IP so from th...

ChrisCross · 02-04-2019

I am not interested in NAT, just straight up routing, e.g. statically define a route (network) from an interface on the switch (IP addr). That is or is not possible?

ChrisCross · 01-24-2019

sw01#show ip routeMaximum Parallel Paths: 1 (1 after reset)IP Forwarding: enabledCodes: > - best, C - connected, S - static,R - RIPS 0.0.0.0/0 [1/4] via <ISP serail>, 01:12:43, te1/0/11C 10.255.255.0/24 is directly connected, oobC 66.156.179.160/29 i...

ChrisCross · 01-24-2019

Forgot, I also did a 'no switchport' on xg 1/0/11

Member Since	‎01-24-2019 06:55 PM
Date Last Visited	‎02-11-2019 08:20 PM
Posts	4

User Statistics

User Activity

XG 550 As a Router

Re: XG 550 As a Router

Re: XG 550 As a Router

Re: XG 550 As a Router