https://appsync.biz/dafont/ https://192168ll.onl/ https://appsync.biz/filehippo/I've created a WLAN group called "Disabled", with no WLANs active. Then, under the AP Group you can select the WLAN Group that radios go into - just select the Disabled...
Connect two access points to the same network.Make sure that there is only 1 DHCP server.Use the same wireless network name (SSID) for both AP's.Use the same password and encryption settings for both AP's.https://bluestacks.vip/ https://kodi.software...
Currently I'm not capturing syslog to any external host, no IP address entered for a syslog server in Management => Logs => ConfigSyslog level is set to ERRORS and Facility is "Local use 0"WLC Config Analyzer 4.16 gives Best Practice message below:20...
Which tells that the AP got an option 43 from WLC but it could not join using that one.Besides, you should not configure option 60 under the scope. You delete the configuraiton for option 60. option 60 should be included in the DHCP request from the ...