About Neobt

Neobt · 06-23-2020

Hi Community, We are triying to implement a sip trunk directly from VCS to SBC without CUCM, once the sip trunk is established the calls are rejected with the error "Message Too big", we have created a pipe limited to 64K reducing codec but sip invi...

Neobt · 03-20-2019

Hello guys, We have a problem. We download new IOS for asr1002-x in bootflash asr1002x-universalk9.16.03.08.SPA.bin We confirm that the Checksum and Hash is ok but when I reboot the router. it load the old IOS. We try with this Config but no result...

Neobt · 06-29-2020

Hi, Our main concern is that if we change this configuration it will apply to all SIP calls through VCS, so it may have impact on video calls

Neobt · 06-23-2020

Hi Eric, The error message comes from SBC (Oracle) due all m lines and attributes within invite + SDP

Neobt · 03-20-2019

Thank you very much for your quick response!!!!

Neobt · 03-20-2019

Do you refer to this? Slot CPLD Version Firmware Version --------- ------------------- --------------------------------------- 0 14012203 15.3(1r)S R0 14012203 ...

Member Since	‎02-11-2019 09:37 AM
Date Last Visited	‎04-26-2024 02:32 AM
Posts	6

User Statistics

User Activity

SIP TRUNK from VCS to SBC

ASR1002 no load IOS after reboot

Re: SIP TRUNK from VCS to SBC

Re: SIP TRUNK from VCS to SBC

Re: ASR1002 no load IOS after reboot

Re: ASR1002 no load IOS after reboot