Hello Joey,
In order to make this setup work, you'll also need a RADIUS server which will authenticate the corresponding user/MAC address to its VLAN (e.g if it's in the predefined MAC table, the device will go to VLAN 2, if it's not - it will go to...
Hello,
I am really sorry for the inconvenience you are experiencing.
It seems that indeed there is a PoE misnegotiation between the WAP and the Aruba switch.
Is there any possibility that you can force the 3/17 port to provide full 802.3at PoE?
Ki...
Hello Daniel,
It sounds like a software defect to me, but please try to factory reset the WAP and try again.
If the problem is not fixed by that, please enable the logs and call us at:
http://www.cisco.com/c/en/us/support/web/tsd-cisco-small-busine...
Hello,
As stated above, please call our line so we can open up a ticket and escalate it.
The more escalations regarding this problem, the quicker a fix will be made.
Kind regards,
Milan Milanov
Hello,
Please be advised that at least on our Small Business devices for IKE Phase 1 you can specify only one remote WAN IP address.
For IKE Phase 2 (VPN Policy Configuration) you can choose either a single IP address (usually the network address, e...
