Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I'm somewhat of a newby specifying Cisco devices and I've made an error.I have 2 Catalyst 2960S switches (C2960S-24PS-L).Based on this snippet of web copy from the Cisco website:What's new for the Cisco Catalyst 2960-S Series Switches with LAN Base S...
Hello again,Well, I seem to be getting 'schooled" by these ASA 5510 devices lately. I just had a lot of help resolving an inter-interface communications problem and now I've got a (hopefully small) routing problem on another 5510. I hope the commu...
Howdy,ASA / Cisco Novice here: I have an ASA 5510 attached to 2 internal networks. Everything is working except communications between the 2 internal interfaces.I can ping the FW from either interface and I can ping hosts on both networks from the C...
Well, I had high hopes for TCP Bypass but it doesn't appear to be a usable solution. At least not yet.First, just FYI, It seems to be necessary on both ASAs. If I deactivate the Service Policy on either FW, communications fail.Worse, although some...
Well now that's not what I expected you to say. I did the HQ ASA first and then tested but was not able to connect.I then did it on HighlineASA and everything connected.Is the fact that I have it on both ASAs the cause of extreme slow connection?Tha...
Hmmmm. TCP Bypass.Really good suggestion.I now have full connectivity but man is it slow. Is that expected?Here's what I did:On HQASA:access-list tcp_bypass extended permit TCP 192.168.100.0 255.255.255.0 192.168.1.0 255.255.255.0Class-map tcp_bypa...
