Hello, I have a Cisco 2951 router I use at home, and I suspect it to give me some issues.
The internet (via a cisco cable modem) drops the conenction (status says there is no traffic) and the connection drops
I checked the router and I see log...
Hello, I am configuring an AP to 'snif' IP traffic from wireless IoT devices and trying to make DNS work if I try to ping, for example google, from the AP, it works with the IP address itself, but not the host/domain name, for example: AP#ping 142...
Hello, I have two access points, but they are connected to a computer:AP1 192.168.66.6 (the ipaddr of the computer interface is 192.168.66.1)AP2 192.168.67.6 (the ipaddr of the computer interface is 192.168.67.1)The computer's ip "itself" is 192.168....
Hello, I own a domain name, let's call it mydomain.us, and I have a few hosts that are multihomed and have a public IP as well as a private IP, and I am trying to see if I can do the following on a Cisco 2951 router. If I want to use the same hostnam...
I think I got it;
Charon-2951 uptime is 8 minutesSystem returned to ROM by reload at 20:10:37 MDT Fri Oct 13 2023System restarted at 20:13:13 MDT Fri Oct 13 2023System image file is "flash0:c2951-universalk9-mz.SPA.156-3.M9.bin"Last reload type: Norm...
cool, I'll do that.
copy flash0:c2951-universalk9-mz.SPA.154-1.T1.bin tftp:
still gives me the same error
%Error opening tftp://192.168.2.8/IOS/c2951-universalk9-mz.SPA.154-1.T1.bin
(No such file or directory)
And of course it isn't...
I adapted the commands, with wat I saw on my router, that seemed to work. So I have the newerish IOS running now. (I am wondering still, if I can save the old image to my ftp server to save it?) Just in case.
If I delete the oldest IOS, ...
the 2951 doesn't seen to recognize
Could I just skip it? and continue ? Also I think it doesn't recognize 'flash' it's called flash0 on mine (dir flash doesn't work, dir flash0 does work.
Also with the
I tried following the instructions.
The router/2951 doesn't know
(it doesn't recognize
) can I just skip it and proceed from the conf t(erminal) on? (also, flash doesn't exist, but flash0: (dir flash doesn't work, dir flash0...