Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,
At the console port, I can access the first level of password with the local password. However, as soon as I type enable, the switch asks me for a username/password. As it turns out, the username/password that allows me into the switch in t...
Hi. I am trying to create a VLAN in my 6509 with MSFC2 switch but unable. What am I doing wrong? I have already created the VLAN interface on the router side. Thanks.Here is the error message.Campus_Catalyst> (enable) set vlan 700 type ethernet st...
Thank you for your help. I configured the switch as you suggested and the problem remains. When I tried to console in, it asks me for the username/password. As it turns out, the username/password is to my tacacs server. I would like for the conso...
Thank you for your reply. the problem is that when I tried to use the "login local" command, the switch won't let me and generated an error. Please see below:
O1S-3#O1S-3#config tEnter configuration commands, one per line. End with CNTL/Z.O1S-3(c...
Hi. I did just that and still the same error.Campus_Catalyst> (enable) set vlan 700VTP advertisements transmitting temporarily stopped,and will resume after the command finishes.Duplicate SAID value 100700Vlan configuration failed (19)Campus_Catalyst...
