Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Trying to keep what seems like a convoluted problem fairly simple.For this particular problem, I have 4 interfaces on the ASA 5510 (untrust, trust, prod, dmz), 3 subnets and a single VPN network.VPN network = 10.1.55.0trust interface = 192.168.1.0pro...
I have two switches, a 2960 (sw01) and a 2948 (sw02). The sw01 is trunking via dot1q on Gi0/24 to sw02 on 2/48. Why are VLANs 2-4 not active on sw02?sw01#sh int Gi0/24 trunkPort Mode Encapsulation Status Native vlanGi0/24 ...
I've got a C2960 (sw01) and a C2948. (sw02) The sw02 switch is trunked with sw01, and is meant to serve as an extension to the VLANs (1-4) that exist on sw01. It is trunking properly, however, how would I go about giving the sw02 an IP so that I can ...
For years now we've had an ASA5510 running an old version of ASA/ASDM (7.0/5.0) and couldn't access ASDM through a modern system with a recent JRE, so we didn't bother with this.However, we've recently upgraded ASA/ASDM for purposes of adding failove...
Awesome, that did it. I was half inclined to do that myself several times this morning, but for some reason I figured that if ""="", then it would match and be happy. But I guess a NULL name is not as good as an actual name. Go figure!Thanks again gl...
Hey again glen, thanks for the help yesterday. These are the same switches, just moving on the next issue. Is this what you need?sw01#sh vtp statusVTP Version : 2Configuration Revision : 7Maximum VLANs supported locally :...
sw02> (enable) sh vlanVLAN Name Status IfIndex Mod/Ports, Vlans---- -------------------------------- --------- ------- ------------------------1 default active 4 2/1-2,2/4-47,2/49-52...
Blanked out IPs are all public ...Also stripped out all user informaton.: Saved:ASA Version 8.4(3) !hostname fire2domain-name xxxxxxxxxxx.comenable password EKulpKJap2J/lkIx encryptedpasswd jI7uBnbk1SCnR6Lm encryptednamesname xxx.xxx.xxx.xxx Bandwidt...
