My work has a couple of extra 1811's that I grabbed in hopes of using for my lab. I upgraded it to 12.4.24.T8, but some of the commands seem different than a 2600 router or 2950 switch. Are these still viable options to use for a lab, or sh...
Background: I have a couple of ASA 5510's I'm going to put in our lab environment. I have restored them to default config and set up the m0/0 interface with an ip/mask and started the http server. My lab environment is on the 10...
Thanks. Quick question on these. FA 0 & 1 appear to be different than the switch ports. I was able to connect my ISP's modem to 0. I'm now trying to connect my wifi router as an access point. Are the 0 & 1 ports trunking ports only? I can't fi...
I think it worked, but I'm unable to check right now since I am remote. I could test if I also enable ipv6 to run in conjunction with 4v. Any advice on how to get that setup?Thanks
Sure thing...oh and how do I remove the extra http lines?LAB-ASA2(config)# show config: Saved: Written by enable_15 at 20:57:08.953 UTC Mon Dec 10 2012!ASA Version 8.0(3) !hostname LAB-ASA2domain-name azdev.localenable password Oa3q1NIIlGy4tuwv encr...