Is there any source for information about the different model types of the UVM cards. We have model E built in our IGX network and our partner want's to replace one with a model type A. Are these models interoperable or will we have problems when we ...

Is ist possible to generate a snmp test trap from cisco routers with IOS? On Catalyst switches I found the CatOS command "test snmp trap!" command but I didn't found any reference about the SNMP trap number ( <trap_num> ).Any information would be use...

When I type a "show ip route x.x.x.x) I get following output:Router1#sh ip route 10.232.30.25Routing entry for 10.232.0.0/18 Known via "ospf 1", distance 110, metric 1594, type inter area Redistributing via ospf 1 Last update from 10.205.106.109 o...

We have 2 C3600 connected via 2 MB leased Line to one central 3600. In case of a break of the leased lines, the both remote routers should dial 15 b-channels but the don't. One dialed 10 connections, the other one only 13 channels and both tell me in...

We have 2 C3600 connected via 2 MB leased Line to one central 3600. In case of a break of the leased lines, the both remote routers should dial 15 b-channels but the don't. One dialed 10 connections, the other one only 13 channels and both tell me in...