Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Does Cisco implement certain limits to the burst size in relation to the CIR. I'm looking at a config for a customer and they basically have a burst-size value that's based on a burst period longer than an hour.For example, having a policer with a 10...
I'm looking at an ASR1K-X with an ESP40. Datasheets shows up to 12Gbps encrypted aggregate throughput.If I exceed those numbers, is there a command that would show drops that occurred due to hitting encryption/decryption limits?Is it QOS aware? With ...
Is PIM required between MSDP peers? I've been told that it's not but I can't get it to work in my lab. The first packet gets encapsulated in the MSDP message and makes it all the way to the destination, but subsequent packets don't go through unless ...
I'm looking at a customer's QoS configuration, and I noticed that they identified bandwidth, instead of percentage, which adds up to something much less than the interface bandwidth. I assume that the remaining bandwidth is shared in proportion to th...
I have an ISR 4321 with a 100M license that terminates a 100M WAN circuit. The 100M on the 4321 is an aggregate throughput (all flows through the box). My 100M WAN circuit is 200M in aggregate (100 in/100 out). I've oversubscribed the box 2:1.When my...
Thanks! I'm overseeing the network for a customer and I point out issues with a bunch of their QOS configuration. Their engineers are saying it works fine. I've worked with other vendor technology where they limit the burst period to 600ms regardless...
