Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello, as shown in the picture belowI'm thinking of installing Access Point on a wall that's 8m high..Like the point of use, we need to provide 50 meters of service with one access point 3 meters long from the floor, and I would like to ask which ant...
안녕하세요 c9300 stack 으로 사용중이며 용도는 작은 사무실의 백본으로 사용중입니다.os 업그레이드 계획중 최소 단절(3분이내)로 작업요청을 받았으며, 이에 확인하던 중 Extended Fast Software Upgrade 로 업그레이드시 가능할것같은데.. 요구사항에 ROOT 일경우 지원이안된다라고 적혀있는데.. 그럼 백본급 스위치에서는 해당기능을 사용을 못할거같은데.. 다른 방법은 없을까요?
hellodear teachersOne problem occurred.I am using MR 56, and some clients are disconnecting when using Windows rdp.Has anyone faced a similar problem?i need helpthank you
helloI am an engineer from KoreaI am currently looking at a product called IW 6300 while checking an outdoor AP, but I can't check the country code of Korea, so is the AP not usable in Korea?https://www.cisco.com/c/dam/assets/prod/wireless/wireless-c...
I'm currently experiencing a bug in the 7.0(3)I7(10) version.Devices do not receive tac support as they are devices for which the service cannot be purchased.7.0(3)I7(10) < There is no corresponding version in the bug report, but the symptoms are the...
I tested it again It works normally in a psk environment, but wifi is disconnected when rdp is accessed during 802.1x authentication. What could be the cause?
helloThanks for replyingCurrently, Windows RDP is an internal communication, so there is no firewall setting.Of course, there are no Meraki firewall settings.
helloIf you have already applied the license, you need the license file when reinstalling. If you request the file from tac, you can get it again and apply it to the reinstalled ise.
