About mark.lambe

mark.lambe · 01-21-2002

Hi all,GOt a problem with one of my catalysts, and it is showing 100% processor util. THe main culprit is the L3Aging process, but I can find nothing on the Cisco site to help. Has it got something to do with MLS or netflow? Any help much apprecia...

mark.lambe · 10-26-2001

Hi all,Have been having a hard time finding any ifo to help me with this issue. I have an MSFC in a 6509 that I am unable to tunnel thru to using session 15. I can get to session 16 OK. When I do a sh mod 15 I get the following output. I have tri...

mark.lambe · 02-14-2002

Try out Airsnort. It runs on Linux as a free project (GNU I think), and mite have bin ported to Windows. Check it out here: http://sourceforge.net/projects/airsnort

mark.lambe · 01-28-2002

If you want to monitor traffic over multiple VLANs use the RSPAN function. I use it to aggregate traffic from multiple VLAN's into a destination port that is attached to a sniffer.First set up an RSPAN VLAN, then you can insert ports or VLANs that y...

mark.lambe · 01-22-2002

Have it sorted Christof. Looking at the configs someone was running netflow data export and once I disabled that the switches came back to normal. I reckon that the NDE piece should be treated with care especially as it was running a full flow. Tha...

mark.lambe · 11-23-2001

I am using Agilent Adviser. Costs about $5000 for the software version, but they do a 45 day trial.Also NetXRay, and Ethereal (free for simple packet sniffing). MS NetMon not bad either.l

Member Since	‎10-26-2001 05:28 AM
Date Last Visited	‎08-18-2017 03:50 AM
Posts	6

User Statistics

User Activity

Anyone know what L3Aging is on 6509?

MSFC in 'other' status

Re: 802.11 Radio Scanning tools

Re: SPAN ports and VLAN

Re: Anyone know what L3Aging is on 6509?

Re: Can anybody tell me which is a good network management softw