Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I'm trying to distribute/load IOS on our 4507 switches via the RME softwre distibutin (LMS3.1) but its FAILING.On the 4507 switches we are currently running 122-40.SG on some and 122-50.SG on others but RME fails on both platforms when trying to load...
We recently installed a secondary ACS solution engine in a separate geographical area and the replication works fine.I tried testing for failover by switching off the primary ACS. Failover on most edge switches and wireless APs was successfull but mo...
I have a new ACS Solution engine 1113 running v4.1.1.23 and CSA build 4.0.1.543.2I cant seem to configure a static IP address on the server. Each time I configure static IP entries via the console (IP address, DNS, Default gateway) and disable DHCP a...
HiWe are currently running Cisco ACS solution engine 3.2.3.11 and using a Windows Domain Controller as a remote agent. We now need to upgrade the ACS to 4.11. Do I need to upgrade the remote agent on the Domain Controller as well?2. Can any PC/laptop...
We have one ACS server on the network and we need to add a second server. The secondary server will be replicating the primary.Is it advisable to point some devices to the primary and the other half to the secondary server to balance the load? JT
Thank you for the response.I know the secondary server replicates the primary and NOT vice-versa, so does this mean we have to set up all the device groups ONLY on the Primary but point some of the devices to look at the Secondary server first?JT