Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,I have my router configured with a Static NAT command, where a LAN client, configured with a private IP address, is reachable from an internet client through a Public IP address, as is tipical for a web server.I wanted know if is possibile to laun...
Hi,I have my router configured with a Static NAT command, where a LAN client, configured with a private IP address, is reachable from an internet client through a Public IP address, as is tipical for a web server.I wanted know if is possibile to laun...
Hi,following my LAB scenario: - my router is configured with NAT Overload for outgoing traffic; - one LAN client generate two session, one TCP and one UDP using the port 5000 for both protocols, to an Internet client port 63000; - during the transla...
Hi,following my LAB scenario: - my router is configured with NAT Overload for outgoing traffic; - one LAN client generate two session, one TCP and one UDP using the port 5000 for both protocols, to an Internet client port 63000; - during the transla...
Hi,I have configured my cisco router 1841 with nat overload and static nat 1:1 to 2 lan client as follows:1. LAN IP 192.168.1.2 navigate with WAN public IP, example 1.1.1.1 - NAT Overloadip nat pool natpool 1.1.1.1 1.1.1.1 netmask 255...
Hi,I know that the TCP and UDP port is reserved by IETF standards and is not possible use the port in Internet application.My request is for to know what has to append if starting a TCP and UDP session through the 0 port is normal that the router th...
