i have been recieving the following error on my SG350X-24 managed switch. it only occurs when we plug 2 devices into the switch's 10gbe ports (rj45, not sfp+), even when no data is being transferred over the 10gbe lines, the fans go from level 0, through 1-2-3-4 and then 5, followed shortly after by the following warning: %Environment-A-ENV-MONITOR-CHNG: sensor 4 (Phy) temperature 99C .Temperature reached the critical threshold, All ports will be shut down in 2 minutes the ports then shut down. the switch is cool to touch during this whole process. switches are in a 25°C environment with good airflow. i have two of these switches, linked together with an sfp+ cable. when i try the same test, but have 1x device connected to 1x rj45 10gbe port on each switch, instead of both on the same switch, there is no problem. any ideas? i found another topic with similar reported issues with a SG500 a few years ago, looks like it was resolved with a firmware update, but i can't find any info about my switch in particular. https://bst.cloudapps.cisco.com/bugsearch/bug/CSCux37567/?rfs=iqvred thanks!
... View more