Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,
An upgrade is being planned for a two-node deployment of Cisco ISE version 3.1 to version 3.3. These are SNS-3615 appliances. I have a question about the CIMC in the process.
The CIMC currently has BIOS version C220M5.4.1.3i.0_ISE; Firmware ve...
Hello,
I have this message in the Health Monitor, however taking a look in the partitions the most high ocuppation is used by /Var.
Please, how can I do for free some space from this partition.
I put an image with the occupation of the partitions.
Th...
Hello,
I'm unable to clear health alert "Interface Status" in FMC ver 7.2.5 after enable a pair of subinterfaces in the FTD.
The detail of error is:
Interface 'Ethernet1/6.250' is not receiving any packetsInterface 'Ethernet1/6.250' has no linkInterf...
We have an FMC ver 7.2 and recently was activate the passive authentication through the ISE. This is for begin to use the url and content filtering with the users.
When we take a look at the collumn in the connection events we can see the URL informa...
We have a FTD managed by FMC.
For some reason it's nos possible to ping the address 8.8.8.8 and 1.1.1.1 for example. But if we ping the address 8.8.4.4, it responds to the ping.
We have a default static route to the internet provider, but when enteri...
Thanks.
One last thing, but now with the Cisco ISE operating system. According to Cisco documentation, Cisco ISE 3.1 is based on RHEL 8.2; however, Cisco ISE 3.3 is based on RHEL 8.4. When migrating from 3.1 to 3.3, is there anything you need to take...
Thank you for your response,
I've seen the compatibility of ISE 3.3 with the SNS-36xx server, but I'm still not sure if a CIMC firmware upgrade is mandatory.
Is there a compatibility matrix that shows a direct relationship between Cisco ISE 3.3 and t...
Thanks Marvin,
In the case of old SRU, trying to delete the old files I received the message "rm: remove write-protected regular file 'Cisco_Firepower_SRU-2020-02-25-001-vrt.sh.REL.tar'?".
It's still safe to delete the files?
By other way, in the dir...
