Unable to clear health alert "Interface Status" in FMC ver 7.2.5

[LuigiDiFronzo9542]

Hello,

I'm unable to clear health alert "Interface Status" in FMC ver 7.2.5 after enable a pair of subinterfaces in the FTD.

The detail of error is:

Interface 'Ethernet1/6.250' is not receiving any packets
Interface 'Ethernet1/6.250' has no link
Interface 'Ethernet1/6.251' is not receiving any packets
Interface 'Ethernet1/6.251' has no link
Interface 'Ethernet1/6.900' is not receiving any packets
Interface 'Ethernet1/6.900' has no link

I tried to turn off the option below in the Health Policy but nothing happens:

Interface Status
Firewall Management CenterFirewall Threat Defense

Monitors interface traffic

thanks

[LuigiDiFronzo9542 · Accepted solution]

Already found the solution.

In case of change of Health policy must to deploy it in the same policy Health to the devices.

Thanks.